Product Model: OKY3199-4

Dual DC Stepper Motor Drive Motor Controller Board Module TB6612FNG Replace L298N

Product Description

1.The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes – CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.CJMCU.

2.Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).

3.Power supply voltage: VM=15V max, VCC=2.7-5.5V.

4.Output current: Iout=1.2A(average) / 3.2A (peak).

5.Standby control to save power.

6.CW/CCW/short brake/stop motor control modes.

7.Built-in thermal shutdown circuit and low voltage detecting circuit.

8.All pins of the TB6612FNG broken out to 0.1″ spaced pins.

9.Filtering capacitors on both supply lines.

Share This Product